GigaDevice has introduced new variants of its GD32H7 microcontroller (MCU) family for robotic motion control, industrial automation, and human-machine interfaces (HMIs). The devices combine Arm Cortex-M7 processing with dedicated hardware for EtherCAT communication, motor position feedback, graphics processing, and analog signal acquisition.
The GD32H77x devices operate at 600 MHz, and the GD32H78x versions operate at 750 MHz. Both have 640 KB of tightly coupled memory, giving the processor predictable access to time-critical instructions and data without the latency of cache misses or shared bus traffic.
This is important for motor control systems, where current measurements, rotor position calculations, and pulse-width modulation (PWM) updates need to be completed within each control cycle.
The MCUs also include a hardware math accelerator for trigonometric calculations, fast Fourier transforms, and finite impulse response filtering to reduce the CPU workload during control and signal processing operations.
The GD32H77R embeds an EtherCAT SubDevice controller and two 100-Mbits/s Ethernet PHYs in a 9 × 9-mm BGA169 package for robotic joint controllers. EtherCAT supports synchronous motion commands from a single controller. The integrated PHYs remove the need for external Ethernet transceivers.

The MCU also supports EnDat, BiSS-C, and Tamagawa encoder interfaces for motor position feedback. The Arm processor then uses this information to calculate control outputs and update PWM signals. The GD32H7xE variants offer comparable communication and feedback options for industrial motion control.
The GD32H78D and GD32H77D include a two-lane MIPI DSI interface and an image processing accelerator that handles graphics operations. The devices also support GUI frameworks such as LVGL, emWin, and Embedded Wizard.
The GD32H789 and GD32H779 feature 14-bit analog-to-digital converter and high-speed digital filtering for industrial automation The peripherals support current and voltage measurement for variable frequency drives and digital power converters.
GigaDevice provides evaluation boards, field-oriented control reference projects, robotic joint development kits, and GUI development resources. The GD32H7 family also has a software test library certified by TÜV Rheinland to IEC 61508 SC3 for supporting functional safety development.
GigaDevice expects full sample availability in January 2027, followed by mass production in April 2027. The company demonstrated the robotic control and HMI applications at electronica 2026, in Munich, Germany.
The post GigaDevice GD32H7 MCUs Target Robotic Motion Control and Industrial HMIs appeared first on Embedded.




