The IS31FL370x series of LED drivers from Lumissil combines high-speed matrix scanning, dithered PWM, and built-in LED diagnostics. Suitable for a wide range of HMI applications, the drivers minimize visible flicker, rolling-shutter camera banding, and audible capacitor noise associated with scanning.

Matrix configurations scale to accommodate up to 135 individually dimmable LEDs. The IS31FL3707 provides 8×8 or 7×9 matrices, the IS31FL3706 provides 9×8 or 8×9 matrices, and the IS31FL3708 provides 16×8 or 15×9 matrices. PWM frequencies are programmable from 0.25 kHz to 220 kHz. In 220-kHz 6+2-bit dithered PWM mode, the devices achieve a 4.5-µs scan period, more than six times faster than earlier-generation devices, enabling matrix scan rates up to 24 kHz.
To simplify testing and service, the drivers include individual open- and short-LED detection, with fault status stored in registers accessible through an I2C-compatible interface. These diagnostic capabilities reduce external circuitry and facilitate automated production testing, system health monitoring, fault isolation, and field-service troubleshooting.
The IS31FL3706, IS31FL3707, and IS31FL3708 are available now in volume production.
Source: EDN







